| Cast Iron or Stainless Steel |
Myers
Myers offers a varied product
line ideally suited for dewatering ranging from 4/10 HP 2"
discharge to 125 HP 12" discharge consisting of sump,
effluent, non clog, single vane, 2 vane, vortex, centrifugal,and
engineered products. Stainless steel and explosion proof are
available.
Please feel free to contact a sales
associate, review the associated sub links for more detailed
information, or click on the product listed in the resource
link..
For more information call 1-800-255-1352 or visit:
www.femyers.com
BJM
The SV series pumps rang from
1/3 Hp with 2" discharge to 10 HP with a 4" discharge
and are equipped with vortex impellers, suited for handling
mud, raw sewage, viscous liquids, rags, wood chips and other
solids. They pass solid up to 90% of pump outlet diameter.
Supplied with standard 33' power cord, 304 SS motor housing,
three seal motor protection, class F motor insulation, automatic
switch turns pump motor off if temperature and/or amp draw
raises too high, and hardened cast iron stands up to rough
handling and pumping sandy water unlike pumps of soft resin
impellers or plastic exterior components.
For more information call 1-800-255-1352 or visit:
www.bjmpumps.com
Hydroflo
Hydroflo's pump product line
consists of vertical turbine, submersible turbines, sump,
sewage, and dewatering. With a full range of capacities and
heads, including 316 SS pumps and engineered products ranging
from 170 GPM to 1200 GPM.
For more information call
1-800-255-1352 or visit:
www.hydroflopumps.com
|
